Water heaters, including the tankless options from Furrion, are not specific fits for any one trailer, so what you'll have to do is take a couple measurements to see if the correct option is indeed the Furrion RV Tankless Water Heater - Gas - Automatic Pilot - 60,000 BTU - 16" x 16" Door # FR98SR.
The first measurement you need to take is the compartment where the heater fits, and it needs to be at least 12-5/8" wide x 12-5/8" tall x 19-1/4" deep, which is the size of the heater itself.... view full answer...
I am not sure which vent these trailers use but what you can do is go with a universal cover like the MaxxAir UniMaxx Universal Replacement Lid for RV and Trailer Roof Vent part # MA00-335001 for white or part # MA00-335002 for smoke. If you don't want to go with universal then you'll need to know you vent model number found on the sticker inside the frame. view full answer...
The correct lift kit for a Livin’ Lite Quicksilver 8.5x30 with Dexter Torflex #12 Axles is the Torflex Lift Kit part # K71-725-02. I was able to confirm this for you by calling Dexter with your axle's serial number. That said, this will hold true for any trailer with a Dexter Torflex #12 Axle usually depicted as T12 on the axle tag. view full answer...
Yes, the etrailer.com Trailer Tongue Weight Scale part # e99044 will work well to determine the tongue weight of your setup so that you can get a properly rated weight distribution system for your trailer. When choosing a weight distribution system you do want to chose spring bars that have a tongue weight rating that your tongue weight falls in the middle of.
For example, Equal-i-zer Weight Distribution System w/ 4-Point Sway Control part # EQ37100ET is rated for trailer tongue weights... view full answer...
I recommend Adco Olefin All-Climate + Wind RV Cover for Travel Trailer - Up to 22' Long - Gray part # AD47ZR for the 2016 Livin Lite CampLite Travel Trailer. The Adco Olefin top will keep the roof of your Livin Lite trailer protected from harmful UV rays that can cause dry rot on other covers. I have attached a video for your reference.
As far as being able to walk on the roof of the travel trailer that is something that really depends on the amount of roof support the trailer has. I... view full answer...
The Torflex Lift Kits like part # K71-707-02 do come with a protective painted black finish. As mentioned, the paint can chip if not careful. That said, the finish is not really crucial for most applications which is why the paint is not as durable. However, since you have an aluminium frame trailer it might be best for you to either send the lift blocks off for powder coating or simply apply a few more coats of paint yourself. Once this is done, I'm sure they will be just perfect for you... view full answer...
The Reese Pole-Tongue Adapter # RP58393 will allow you use the Blue Ox TrackPro Weight Distribution # BLU36FR. You will need this as the Blue Ox Adapter # BXW4023 is only compatible with their SwayPro style system which uses chain hangers. view full answer...
Go To Results